SCHOTTEL SV 1, Руководство пользователя

Страница: 138 / 156

30 / 48
Control System and Electric System (PX 105) FIT--Wa 1159850 Dec./06 en
Take--over from the engine room board to the
chair control stand board
The change from the engine room board to the board
of the chair control stand is carried out as follows:
1. Press illuminated push--button ”SEND TO
BRIDGE” (31/2) on the engine room board.
Illuminated push--button ”DESK ON” (32/2) on the
chair control stand board flashes.
RPM
EMERG
STOP
POWER
MODE
STOP
DRIVE
MOTOR
RESET
FAULT
POWER
LIMIT
DESK
ON
MAIN
DESK
SEND
TO BRIDGE
LOCAL
CONTROL
FU
RUNNING
START
DRIVE
MOTOR
ARM
CHAIRS
1
2 3
Figure 31
2. Press illuminated touch contact ”DESK ON” on the
according chair control stand board.
Illuminated push--button ”DESK ON” shines.
The signal lamp ”ECR DESK IN SERVICE” (32/3)
on the chair control stand board goes out.
The signal lamp ”ARM CHAIRS” (31/1) on the
engine room board shines.
Signal lamp ”ARM CHAIR ... IN SERVICE” (32/1)
on the non--active chair control stand board
shines.
Take--over from the chair control stand board
to the engine room board
The change from the chair control stand board to the
board of the engine room is carried out as follows:
1. Press illuminated push--button ”SEND TO ECR”
(32/4) on the active chair control stand board.
Illuminated touch contact ”DESK ON” (31/3) on the
engine room board flashes.
2. Press illuminated push--button ”DESK ON” on the
engine room board.
Illuminated touch contact ”DESK ON” (32/2) on the
previously active chair control stand board goes
out.
Signal lamp ”ARM CHAIR ... IN SERVICE” (32/1)
on the previously non--active chair control stand
board goes out.
1
2
STOP
DRIVE
MOTOR
RESET
FAULT
POWER
LIMIT
DESK
ON
ARMCHAIR
PS
ECR
DESK
SEND
TO ECR
LOCAL
CONTROL
FU
RUNNING
START
DRIVE
MOTOR
ON
IN SERVICE
RPM
RPM
EMERG
STOP
POWER
MODE
ON
PILOT
IN SERVICE
3
4
Figure 32