SCHOTTEL SV 1, Руководство пользователя

Страница: 61 / 156

Betriebs--, Montage-- und Wartungsanleitungen 1099230
Operating--, Mounting-- and Maintenance Instructions
GB
Edition
KD--GE--ge
Ausgabe /
983/00
D/
21 / 25
SRP 1212
Trouble shooting
Malfunction Cause Check/Remedy
SRP makes abnormal noise Bearing and/or gear Hand--in system for repair
during operation wheels defective
Oil temperature warning Filter (Figure 4) is Check contamination indicator,
system responds, oil clogged select second filter with the
temperature too high switch lever, if required
(see section 2.3.1)
Replace filter element
Switch lever (26) is not Move switch lever (26) to one
fully moved to the stop side or properly fit lever and
on one side or is impro-- select filter
perly fitted
Oil level in the SRP is Check oil level (see section 2.2 ),
too high correct the oil level, if required
(see section 4.2 )
The oil type used in the Carry out oil change
SRP is too viscous (see section 3.1)
(viscosity too high)
NOTE
Observe the lubricant table
(see section 3.4 )
Oil has a milky colour Water entering the SRP Take an oil sample of the SRP
check through sight glass (22) oil and check it for water, hand--
in system for repair, if required
NOTE
Oil must have operating
temperature
Increasing or decreasing oil SRP leaking (water enters, Hand--in system for repair
level in the SRP ( during and/or oil emerges)
standstill of the system, check
through sight glass (22))