Operating manual 810378-BAL-EN-170330
Mach/30 2017
Page 46 of 54
10.2.5.
Description of the status word
Byte Bit Status bit
Description
0
0
HV display ON
Mirror bit of the HV EIN bit
(V2.01and
higher)
1
Reserve
2
Collective error / switch off
1: For error or switch off
0: No error
3
Collective warning
1: For warning
0: No warning
4
The high voltage is safety off.
CAUTION:
This SW bit does not fulfill the Per-
formance Level, this is only
achieved by HW feedback.
1: If the high voltage has been
switched off and the output voltage
has discharged to a safe level
0: If the high voltage is switched on /
or the output voltage has not been
discharged to a safe level
0: If a self-test error of the device has
been detected
5
Reserve
6
Drive power status
1: 24 V DRIVE is on
0: 24 V DRIVE is not on
7
Monitoring contact status
1: Relay contact open
0: Relay contact closed
1
0
Heartbeat
This Bit is switched every second
between 1 (logic high) and 0 (logic
low) to display that the HV-supply is
still active.
1
Reserve
2
Reserve
3
Reserve
4
Warning: invalid parameters
1: An invalid parameter (value out-
side of range) has been received.
0: Parameter valid
5
Imax warning
1: I actual is above 80 % of Imax
0: I actual is below 80 % of Imax
6
Reserve
7
Reserve