SCHNIER 810366, Руководство по эксплуатации

Страница: 24 / 54

Operating manual 810378-BAL-EN-170330 Mach/30 2017 Page 24 of 54
Operation 7.
Before operating, the following safety instructions must be read through carefully and
must be understood:
7.1. Safety instructions for operation, service and repair
General information:

A deviation from the conditions for the above mentioned intended use is not
permitted.

Furthermore the operating manual of the surrounding installation must be ob-
served.

The system must be operated by trained personnel.

The employees must be informed at specific intervals about accident prevention
regulations and operating instructions.

During repair and service of the surrounding system the conditions for normal
use of the HV generator apply.

Never work on systems that are under high-voltage.
Specific instructions:
The housing of the high-voltage generator is also used for cooling.
Therefore the housing should be kept clean.
Never operate the device if it is defective, damaged or opened.
Specific repair instructions:
If the generator
must be uninstalled for repair, we recommend disconnecting the
signals in the following sequence:
1. Disconnect M12 CAN bus connection.
2. Disconnect M12 power supply connection.
3. Disconnect HV connection.
4. Disconnect ground connection.
WARNING
Do not open, plug-in or unplug connections under live
voltage.
WARNING
During the deinstallation of an HV generator, parts which are
voltage carrying in operation must not be touched if they are
not grounded with a grounding rod BEFORE the grounding
connection of the HV generator is disconnected!
This must especially be observed with defective HV
generators!
CAUTION
The high-voltage should be switched off before disconnecting
the 24V current wire. Exception: Emergency situations
The HV generator contains no parts to be repaired by the user. It can only be re-
paired by the manufacturer.