Schmalz JumboPicker-Flex, Инструкция по эксплуатации и техническому обслуживанию

Страница: 39 / 71

30.30.01.01183/00 www.schmalz.com EN | 39
6.7.2 Lowering and setting down loads
6.7.3 Picking Up Vertically and Depositing Horizontally
1. The 90° swiveling unit is designed for handling loads, picking up
vertically and depositing horizontally.
2. Pick up the load in the center or at the top so that the load swivels
slowly in the horizontal direction.
CAUTION
Risk of injury when swiveling the rotation unit
When the rotation unit is swiveled by 90°, there is a risk of fingers
becoming pinched in the shaft of the joint.
►
Always keep one hand on the operator handle.
►
Use the other hand to support the swiveling process (position your
hand on the side of the load).
Lowering loads:
The lift tube is in lifting mode as long as the
button (e) is pressed less than the distance to
the first button position.

Press the button(s) in to the first
position.
The tube lifter begins to sink.
The tube lifter returns to the hovering position
when you release the button (e). The initial
position is always at the top.
1st button position
Setting down the load:
Press the button (e) past button position 1.
The load is released/ejected.
2nd button position
e
e