manualshive.com logo in svg

Schiller CARDIOVIT AT-1, Руководство по обслуживанию

Поделиться
Скачать
Schiller CARDIOVIT AT-1 Скачать руководство пользователя страница 61

61

SCHILLER AT-1 / AT-1smartprint ECG Unit

SERVICE HANDBOOK  Issue b  June 2001

Art.No. 2.540022

Thermal Printer Removal

1. Remove the top housing and the printer tray assembly as outlined above.

2. Turn the printer / paper tray assembly upside-down and unscrew the two printer

retaining screws.

3. Gently remove the printhead taking care to retain the two tensioning screws.

Thermal Printer Replacement.

To replace the thermal printer proceed as follows:
1. Position the printer in the printer / paper tray assembly so that the printer mounting

plate lips slot into the dedicated cutouts in the assembly; secure with the two
retaining screws. Ensure that the cable assemblies from the printer to the interface
PCB are not caught and are not strained.

2. Using a spring compressor or a pair of pliers, insert the two tensioning springs so

that the springs are positioned over the outer two moulded spring supports and in
the indent (hole) in the printer mounting plate

3. Replace the printer / paper tray assembly as described on page 60.

4. Replace the top housing as described on page 57.

Checks, Tests and Adjustments after Printer Replacement

Check the print quality as described in Chapter 3.

Printer Motor Removal and Replacement

1. Remove the top housing and the printer / paper tray assembly as

outlined above.

2. Turn the printer / paper tray assembly on the side to get access to

the printer motor.

3. Unscrew and remove the two fixing screws, and carefully lift the

motor out of the assembly.

4. Replace the motor, carefully put it in place and fasten the two

retaining screws.

5. Replace the printer / paper tray assembly and the top housing as explained

above.

Содержание CARDIOVIT AT-1





















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды