Schiller CARDIOVIT AT-1, Руководство по обслуживанию

Страница: 17 / 84

17
SCHILLER AT-1 / AT-1smartprint ECG Unit
SERVICE HANDBOOK Issue b June 2001
Art.No. 2.540022
Automatic Mode
a. without external printer connected or printer switched off
In automatic mode, a full 12-lead ECG is printed in one of two predefined formats
with selectable sensitivity. These formats (see Settings) are selected by the user to suit
his specific needs and requirements
.
When the AUTO GAIN key is pressed before recording in automatic mode, the
unit detects very large waveform amplitudes and sets the sensitivity for the extremity
and/or precordial leads accordingly to reduce the overlapping of traces.
To start the automatic ECG recording in Format 1, press the AUTO START
key:
To start the automatic recording in Format 2, press the ALT key followed by
the AUTO START key:
+
Depending upon which option is included, the printout gives the following:
• ECG recording of all leads in either Standard or Cabrera format according to
selection
• Sensitivity
• Heart Rate
• Speed
• Filter Settings
• Interpretation statements (with option C)
• Average Cycles (with options M, C)
• Intervals (with options M, C)
• Axes (with options M, C)
• Detailed Measurement Table (with options M, C)
To obtain an extra printout of the ECG recording in Format 1, simply press the COPY key:
To obtain an extra printout of the second format, press the ALT key followed by the
COPY key: -
Note: The Auto mode settings for the two formats are detailed in the paragraph
entitled ' Automatic Mode (ECG) Settings` later in this chapter.