manualshive.com logo in svg

Schiller CARDIOVIT AT-1, Руководство по обслуживанию

Поделиться
Скачать
Schiller CARDIOVIT AT-1 Скачать руководство пользователя страница 55

55

SCHILLER AT-1 / AT-1smartprint ECG Unit

SERVICE HANDBOOK  Issue b  June 2001

Art.No. 2.540022

Physical Overview

The AT-1 / AT-1smartprint unit is enclosed in a two part, medical standard, moulded
plastic case.

The top housing contains the keyboard with the base assembly containing all the
electronics of the unit, the thermal printer, the paper tray, the battery and mains
transformer.

The electronics of the unit are contained on two printed circuit boards (control and
power supply board MK 11-10 and the ECG interface board MK 11-2). The ECG interface
board also supports the patient connector. The PCBs are secured on spacers moulded
in the base section.

The battery is secured in position with double sided tape and the mains transformer is
secured on spacers.

The thermal printer is mounted on a printer / paper tray assembly which is secured in the
base assembly.

Because of the plastic construction of the case, threaded metal inserts are used
throughout for all screw fixings.

Test Equipment, Tools, and Accessories

The following list details the tools, test equipment and accessories required to carry out
all functional tests, calibration procedures and adjustments that can be carried out on
the AT-1 / AT-1smartprint. The test equipment given here is general. If specific
recommendation for test equipment is required, please contact the SCHILLER service
department.

• Selection of posi-drive and flat-bladed screwdrivers

• Cleaning agent such as Trichlorethylene

• Double-sided tape

• ECG Patient Simulator

• SCHILLER 10 lead patient cable Number 2.400070 (2.400071 for USA)

• Spring compressor, if available, or a pair of pliers

Содержание CARDIOVIT AT-1





















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды