manualshive.com logo in svg

Schiller CARDIOVIT AT-1, Руководство по обслуживанию

Поделиться
Скачать
Schiller CARDIOVIT AT-1 Скачать руководство пользователя страница 37

37

SCHILLER AT-1 / AT-1smartprint ECG Unit

SERVICE HANDBOOK  Issue b  June 2001

Art.No. 2.540022

Replacing the Recording Paper in the Internal
Printer

The recording paper must be replaced as soon as the end of the paper is indicated by
a red stripe on the lower edge. After the indication first appears, there are about 8
pages left. However, we recommend that the paper be replaced immediately. If no
paper is left, the printing process is interrupted and the paper warning lamp starts to
blink. To replace the paper proceed as follows:

• Press the latch for the paper tray to release the lid with the rubber roller.

• Remove any remaining paper from the paper tray.

• Place a new paper pack into the paper tray with the printed (grid) side facing

upwards.

• Close the lid and press firmly until release catches. Press the STOP key

to transport the paper to the start position.

SCHILLER can only guarantee perfect printouts when SCHILLER original chart paper or
chart paper of the same quality is used.

Содержание CARDIOVIT AT-1





















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды