RTC
®
5 PC Interface Board
Rev. 1.9 e
15 Appendix A: The RTC
®
5 PC/104-Plus Board
576
innovators for industry
15.1.6 Unpacking Instructions and
Typical Package Contents
Carefully remove the RTC
®
5 PC/104-
Plus
board
from the package.
Keep the packaging, including the antistatic bag
the RTC
®
5 PC/104-
Plus
board is delivered in, so
that in case of repair the board can be properly
repackaged and returned to SCANLAB.
Also remove all other articles from the package.
Check that all parts have been delivered. Refer to
the corresponding packaging list.
The package typically includes an RTC
®
5 PC/104-
Plus
board and a data CD (containing the corre-
sponding software (see below) and this manual).
Some product versions may also supply
additional components such as data cables or
converters (see
"Optional Accessories", page 576
Delivered Software
The delivered software package is identical to the
RTC
®
5 software package (see
). It contains
software drivers for Microsoft’s WINDOWS 8,
WINDOWS 7, WINDOWS Vista and WINDOWS XP
(SP2 or higher) and WINDOWS XP Embedded (SP2 or
higher) (32-bit or 64-bit) operating systems,
correction, DLL and program files, as well as utility
files for C, C
++
and C
#
.
15.1.7 Optional Accessories
In addition to the RTC
®
5 PC/104-
Plus
board and its
software package, the following accessories – as with
the RTC
®
5 PC interface board – can be obtained from
SCANLAB (only hardware extensions from SCANLAB
should be used in combination with the
RTC
®
5 PC/104-
Plus
board):
• XY2-100 converter (see
).
• Data cables (see
).
• Laser adapter (see
• Slot cover with a 15-pin D-SUB connector for
using the inputs and signals of the LASER
connector (see
)
15.1.8 Supplementary Software
For customizing RTC
®
correction files on the basis of
test measurements, SCANLAB offers the correXion5
program and its associated manual (also see