SBS Technologies 466-1, Руководство по оборудованию

Страница: 94 / 110

Model 466-1 Adapter
84 VMEbus Addressing
The address modifier generated when the SBus accesses the VMEbus is
determined by the value in the Remote Address Modifier Register. The
programmer should determine which address modifier the target slave
responds to, then write that value to the Remote Address Modifier Register.
Any subsequent memory references to the VMEbus will use this address
modifier. IACK cycles do not use the address modifier lines. The following
table summarizes address modifier codes.
ADDRESS
MODIFIER
(HEX)
# OF
ADDRESS
BITS
TRANSFER TYPE
3F 24 Standard supervisory block transfer
3E 24 Standard supervisory program access
3D 24 Standard supervisory data access
3B 24 Standard non-privileged block transfer
3A 24 Standard non-privileged program access
39 24 Standard non-privileged data access
2D 16 Short supervisory access
29 16 Short non-privileged access
10 - 1F undefined User defined
0F 32 Extended supervisory block transfer
0E 32 Extended supervisory program access
0D 32 Extended supervisory data access
0B 32 Extended non-privileged block transfer
0A 32 Extended non-privileged program access
09 32 Extended non-privileged data access
don't care
state
3 Interrupt acknowledge cycle (uses A01-A03)