Saia-Burgess Controls AG
Manual for PCD7.L79xN room controllers
│
Document 27 / 602
E
N02 │ 2013-11-27
Assembly instructions
Commissioning instructions
2-2
2
Avoid direct exposure to sunlight or light
from powerful lamps.
Do not install next to heat sources such as
heaters, refrigerators, lamps etc.
Do not install next to windows and doors
because of draughts.
2.2
Assembly instructions
■
The compact room controllers must only be installed and connected by an expert
in accordance with the wiring diagram. Existing safety standards must also be
observed.
■
The individual room controller can only be used to regulate the temperature in
dry, closed rooms. The maximum permissible relative humidity is 90%, non-
condensing.
■
Precise temperature measurement is subject to certain requirements as to the
positioning of the compact room controllers.
■ The device can be mounted directly on the wall or flush-mounted within a pattress
box.
Do not fit the compact room controller on
places where airflow trough the direct air
blowing of a VAV or Ventilation System or
trough a downwind of cold air above the
compact room controller exist.
Avoid other temperature perturbation on
the device
1.5
m
