Saia-Burgess Controls AG
Manual for PCD7.L79xN room controllers
│
Document 27 / 602
E
N02 │ 2013-11-27
Functions, regulation
Function
3-20
3
User defined Operation Mode (OccMode) on power up
Selection of a user defined Operation Mode (OccMode) on power up.
This is assistant when the Operation Mode of the controller will be changed over a
timer clock (HVC-Clocks) or when the controller will be used in stand-alone (without
S-Bus connection).
There are different possibilities to change this parameter:
1) Adjustment in the Room-FBox:
This can be useful if no timer clock is used for the changing of the
operation mode.
2) Adjustment over the DefOcc variable (form symbol editor):
This can be useful if a timer clock or superior system is used for the
changing of the operation mode.
3) Adjustment over writing directly the Register 25
(for example with the Debugger)
- Value 0 => Comfort
- Value 1 => Reduced
- Value 2 => Standby
- Value 5 => Reduced Night
This can be useful if the controller works in stand-alone
(without S-Bus communication)
