Saia-Burgess Controls AG
Manual for PCD7.L79xN room controllers
│
Document 27 / 602
E
N02 │ 2013-11-27
Assembly instructions
Commissioning instructions
2-3
2
2.2.1 Mounting / Disassembly
Open the housing
The screw on the underside of the unit unscrew something.
Remove lid down over the screw a bit of time.
Then hang at the top of the lid and remove it altogether.
It should be noted:
●
that all wires are screwed down tight
●
that the ventilation slots are placed above and below (positioning)
●
that the device is mounted horizontally
●
that the 2 holes for the cable feed-in have to be sealed (for example with
polyurethane foam or with the wall isolation) that airflow in to the control
-
ler from the cable duct which could influence the temperature measuring
can be prevent.
Close the housing
Analogously, in reverse order as described in “Open the housing” to proceed.
83.50
3.10
6
60
55.80
84
117
55.80
Terminals
Cable
implementation
