PARAMÉTRAGES EXIGÉS DANS LE SYSTÈME D'EXPLOITATION
RW-470 PLOTBASE Installation 31
1. Ouvrez la fenêtre de réglage en sélectionnant "Démarrer - Paramètres - Panneau de configuration -
Ajout/Suppression de programmes - Ajout/Suppression de constituants Windows".
2. Activez, par déclic sur la case de contrôle, l'option "Management and monitoring tools (SNMP)" (outils de gestion
et de surveillance).
3. Cliquez sur "Poursuivre" et suivez les commandes des autres fenêtres.
•
Protocole FTP::
Afin de pouvoir utiliser le protocole FTP, vous devez exécuter des ajustages sous "Internet Information Services
(IIS)".
1. Ouvrez la fenêtre de réglage via "Démarrer - Paramètres - Panneau de configuration - Ajout/Suppression de
programmes - Ajout/Suppression de constituants Windows".
2. Cliquez sur les services d'information Internet (Internet Information Services (IIS); la case de contrôle ne change
pas. Cliquez sur le bouton "Détails".
3. Activez, par déclic sur la case de contrôle, l'option "Serveur FTP - protocole de transmission de fichiers". Les autres
options " Fichiers communs" et "Internet Information Services Snap In" sont aussi automatiquement activées. Si les
trois services sont activés, cliquez sur "OK" afin de confirmer l'indication.
4. Cliquez sur "Poursuivre" et suivez les commandes des autres fenêtres.
Note :
Si vous désirez utiliser le protocole FTP, vous devez encore configurer des groupes d'utilisateurs. Pour
la manière de procéder, compulsez le chapitre "Configuration de comptes utilisateurs et de groupes:", page
30. En outre, vous devez configurer un répertoire FTP avec préréglage. Celui-ci n'est cependant configuré
qu'après installation de RW-470 PLOTBASE; pour la description, veuillez compulser le chapitre
"Configuration du répertoire standard FTP“, page 33.
•
Pour LPR:
Ce réglage est également requis pour MAC/OS. Veuillez procéder comme suit :
1. Ouvrez la fenêtre de réglage avec "Démarrer - Paramètres - Panneau de configuration - Ajout/Suppression de
programmes - Ajout/Suppression de constituants Windows".
2. Activez, par déclic, la case de contrôle de l'option "autres services de traçage et fichiers réseau".
3. Cliquez sur "Poursuivre" et suivez les commandes des autres fenêtres.
•
Pour RW-470 PLOTCLIENT MAC :
Pour ce client, vous devez installer RW-470 WINPRINT sur le serveur de traçage. Cf. chapitre "Installation du RW-470
WINPRINT" page 33.
Après avoir activé les services nécessaires, veuillez prévoir l'amorçage automatique simultané du "Serveur de traçage
TCP/IP" et du "Service de publication FTP". A cet effet, veuillez procéder comme suit :
1. Cliquez sur "Poste de travail" affiché sur le bureau.
2. Ouvrez le menu contextuel avec le bouton droit de la souris et sélectionnez "Gestion". La fenêtre "gestion
ordinateur" s'ouvre.
3. Cliquez deux fois sur "Services et Applications" afin que les répertoires subordonnés s'affichent. Exécutez de
nouveau un double clic sur "Services".
4. Cliquez deux fois sur "Serveur de traçage TCP/IP". Dans la fenêtre, ajustez sous "Type de démarrage" l'option
"automatique". Répétez la procédure pour "Services de publication FTP ".
5. Fermez toutes les fenêtres.
Paramètres du RW-470 SCANTOOL
Les paramètres suivants sont indispensables pour le RW-470 SCANTOOL. Le programme RW-470 SCANTOOL offre
la possibilité de réserver une partie de la mémoire de travail pour le processus de numérisation. A cet effet, certaines
autorisations doivent être configurées. Veuillez procéder comme suit :
1. Ouvrez le gestionnaire de système via "Démarrer - Paramètres - Panneau de configuration". Ouvrez "Gestion".
2. Ouvrez les répertoires suivants l'un après l'autre : "directive de sécurité locale", "Directive locale", "Allocation de
droits d'utilisateur".
3. Sélectionnez, parmi les lignes directrices, l'option "verrouillage de pages de mémoire" en double-cliquant. La
fenêtre "Paramètres de sécurité locaux" s'ouvre.
4. Cliquez sur "Ajout". Déterminez les utilisateurs qui doivent avoir le droit de régler la capacité de la mémoire de
travail. Sélectionnez un ou plusieurs utilisateurs en double-cliquant sur : "Administrateur", "Administrateurs", <Nom
de l'utilisateur>.
5. Confirmez l'indication par "Ok". Fermez aussi l'autre fenêtre en cliquant sur "Ok".
6. La fenêtre "Paramètres de sécurité locaux" est encore ouverte. Cliquez avec le bouton droit de la souris sur
"Paramètres de sécurité". Dans le menu, sélectionnez "Recharger".
7. Fermez les fenêtres encore ouvertes.
Содержание RW-470 Clients
