PARAMÉTRAGES EXIGÉS DANS LE SYSTÈME D'EXPLOITATION
30 RW-470 PLOTBASE Installation
4. Relancez l'ordinateur. Reliez les câbles au traceur.
Installation du pilote Kernel (RW-470 Kernel)
Veuillez procéder comme suit afin d'installer le pilote :
1. Démarrez votre ordinateur. Après montage de la carte contrôleur type 470, le système d'exploitation signale
automatiquement qu'il a trouvé un nouveau matériel et que l'assistant d'installation du pilote Kernel RW-470 a été
lancé.
2. Cliquez sur le bouton "Poursuivre" afin de lancer le programme d'installation.
3. Dans une prochaine fenêtre, l'assistant interroge comment il doit recevoir les données de pilote nécessaires.
Sélectionnez l'option supérieure "C'est-à-dire la recherche recommandée d'un lecteur convenable pour le
périphérique", puis cliquez sur "Poursuivre" afin de poursuivre l'installation.
4. Insérez le CD d'installation dans le lecteur de CD-ROM. Si le programme d'installation du RW-470 PLOTBASE est
lancé automatiquement, veuillez cliquer sur "Interrompre".
5. Dès lors, l'assistant vous demande où il doit chercher les fichiers de pilote. Sélectionnez "Lecteur de CD-ROM "
pour spécifier l'endroit et cliquez ensuite sur "Poursuivre".
6. Une prochaine fenêtre vous informera que le fichier de pilote (d1kernel.inf) avait été trouvé. Cliquez sur
"Poursuivre" afin de poursuivre l'installation.
7. Dès à présent, vous êtes informé(e) que les fichiers de pilote ont été installés. Cliquez sur "Pour terminer/quitter"
l'installation.
Note :
Vous pouvez contrôler le bon fonctionnement de la carte contrôleur type 470 en vérifiant tout d'abord
l'état allumé de l'indicateur à DEL sur la carte. Si cela n'est pas le cas, veuillez vérifier de nouveau l'assise de
la carte. En plus, vous pouvez contrôler l'état en sélectionnant "Poste de travail" (My computer) et en ouvrant
le menu de contexte avec le bouton droit de la souris. Sélectionnez ensuite "Propriétés – Matériel –
Gestionnaire du périphérique – Adaptateurs multifonctions – Carte contrôleur RW-470 (D1) V1.3". Ouvrez le
menu de contexte et sélectionnez l'option souhaitée sous "Propriétés". La fenêtre visualise l'état de la carte
contrôleur, type 470. En cas de problèmes, veuillez tirer profit de l'aide Windows proposée.
Paramétrages exigés dans le système d'exploitation
Pour la communication entre le serveur et les clients ainsi que pour la configuration du scanner, vous devez encore
ajuster quelques paramètres dans le système d'exploitation. Ce paramétrage devrait être exécuté, comme l'installation
elle aussi, uniquement par un administrateur. Les opérations décrites dans ce qui suit se rapportent aux équipements
d'un ordinateur individuel. Si vous configurez un ordinateur mis en réseau, la configuration peut légèrement différer.
Après avoir réalisé les ajustages, il faut relancer l'ordinateur.
Configuration de comptes utilisateurs et de groupes
En présence d'un grand nombre d'utilisateurs, nous recommandons de configurer des comptes utilisateurs et des
groupes. Plus particulièrement lors de l'utilisation du protocole FTP, la configuration de tels comptes utilisateurs et de
groupes est indispensable.
Veuillez procéder comme suit :
1. Ouvrez le panneau de configuration via " Démarrer - Paramètres - Panneau de configuration". Ouvrez le panneau
de configuration "Utilisateurs et mots de passe". Cliquez sur le bouton "ajout".
2. Réalisez les inscriptions dans les champs "Nom de l'utilisateur", "Nom complet", "Description". Ensuite, cliquez sur
"Poursuivre ".
3. Le système vous demande d'entrer un mot de passe. Insérez un mot de passe et confirmez-le en le frappant
encore une fois dans la case d'entrée "Confirmation du mot de passe" située en dessous. Ensuite, cliquez sur
"Poursuivre".
4. Dans la prochaine fenêtre, veuillez sélectionner l'option "Utilisateur standard". Cliquez sur "Terminer".
5. Fermez les fenêtres encore ouvertes par "Ok".
Pour de plus amples informations concernant la configuration de comptes utilisateurs et de groupes, veuillez compulser
l'aide Windows.
Activation de composants Windows
Les ajustages listés ci-dessous sont indispensables pour le bon fonctionnement des programmes RW-470 PLOTBASE et
RW-470 SCANTOOL ainsi que pour la connexion des clients.
•
SNMP :
Les ajustages pour ce protocole doivent être activés. Veuillez procéder comme suit :
Содержание RW-470 Clients
