REQUISITI DEL SISTEMA
52 RW-470 PLOTBASE Installation
impostazioni internazionali nel pannello di controllo di Windows. Le istruzioni per queste operazioni sono
riportate nei manuali di Windows.
Requisiti del sistema
Leggere attentamente le seguenti raccomandazioni. Queste informazioni possono essere di valido aiuto per
determinare quale è l’hardware ottimale per le proprie esigenze.
•
Sistema operativo:
Microsoft Windows® 2000 Professional con Service Pack 1 oppure maggiore
•
Processore:
Pentium III, 800 Mhz oppure maggiore.
•
Front Side Bus:
133 Mhz
•
Bus-PCI:
Il sistema del bus PCI deve corrispondere allo standard attuale (PCI 2.0 oppure maggiore - 3.3 V oppure 5 V
autoadaptive, carica massima 5 A). Se il calcolatore usato non può soddisfare questo standard, probabilmente il
controller del plotter non verrà riconosciuto.
•
Memoria di sistema:
Usare una memoria di sistema con una capacità di almeno 256 MB di RAM. Con questa memoria di sistema si
può tracciare oppure scandire la massima grandezza del disegno. Se tuttavia si desidera plottare e scandire
disegni con le dimensioni massime simultaneamente, si consiglia di usare una memoria di sistema di 512 MB di
RAM. Il plottaggio e la scansione simultanei di formati più piccoli possono essere eseguiti anche utilizzando una
memoria di sistema minore. Per ulteriori dettagli rivolgersi al proprio commerciante di fiducia oppure ad uno
specialista del supporto tecnico.
•
Disco rigido:
Il disco rigido deve avere almeno una capacità di oltre 10 GB. Si consiglia di non installare il software sullo
stesso drive dove è installato il sistema operativo.
•
Drive per CD
•
Interfaccia di rete:
10/100-Base T Ethernet, la configurazione TCP/IP è assolutamente necessaria.
•
RW-470 Controller:
Dimensioni fisiche: 190 mm x 128 mm
Dimensione PCB: 174,63 mm x 106,8 mm
•
Monitor:
Risoluzione minima di almeno 1024 x 768 pixel
Controller Board Type 470
Il software RW-470 funziona solo, se è stato installato/configurato un controller per il plotter. Quindi, per questo scopo
deve essere stata installata la scheda del controller tipo 470 e il corrispondente software.
Installazione del Controller Board Type 470 (scheda controller)
Nota:
La scheda del controller tipo 470 può venire danneggiata dalle cariche elettrostatiche. Quindi,
estrarre la scheda del controller dall'imballaggio con cautela e maneggiarla solo dai bordi oppure dai
supporti esterni. Possibilmente, non toccare mai i circuiti elettrici con le dita. Se tuttavia questo dovesse
essere necessario, toccare prima un oggetto metallico, in maniera tale da poter scaricare una eventuale
carica elettrostatica.
1. Prima di installare la scheda del controller, spegnere il calcolatore.
2. Installare la scheda in uno slot per scheda PCI libero. Osservare, che su alcuni calcolatori lo slot PCI numero 5
non coincide con lo standard del PCI 2.0. In questo caso utilizzare gli slot per scheda dal n. 1 al n. 4.
3. Inserire la scheda del controller nello slot PCI per la scheda e stringere saldamente le viti fissaggio. Controllare,
se la scheda del controller e fissata correttamente e che nessuna parte della scheda venga a contatto con le
schede adiacenti o con il contenitore ed inoltre controllare, che le viti siano state strette correttamente.
4. Avviare nuovamente il calcolatore. Collegare i cavi con il plotter.
Содержание RW-470 Clients
