OPERATING SYSTEM ADJUSTMENTS
RW-470 PLOTBASE Installation 7
3. Insert the installation CD in your CD drive. If the installation program of RW-470 PLOTBASE is starting
automatically, close it with „Cancel“.
4. The assistant now asks where it should look for the driver files. Select “CD-ROM drives“ and then click on “Next“.
5. In the next window you are now informed that the driver file (d1kernel.inf) have been found. Click on “Next“ to
continue with the installation.
6. You are now informed that the driver files have been installed. Click on “Finish“ to quit the installation program.
Note
: You can test the perfect function of Controller Board Type 470 by checking if the LED-control on the
board is lighting. As it is not the case test, if the board is fixed correctly. You can check the working of the
kernel driver as follows: Select on your desktop „My computer“ and open the context menu by using the right
mouse button. Select „Properties – Hardware – Device Manager – Multifunction Adapters – Controller Board
Type 470“. Open the context menu and select „Properties“. Here you can find information about the status of
the Controller Board Type 470. If problems appear, please use the Windows help.
Operating system adjustments
Several adjustments still have to be made to the operating system for the cooperation between the server and clients as
well as the configuration of the scanner. These adjustments, as well as the whole installation should only be carried out
by an administrator. The procedures described in the following refer to the set up of an individual computer. Should
you wish to set up a network computer, the configuration can differ slightly.
After you have finished making the adjustments you must restart the computer.
Installing user accounts and groups
If you have to manage a big number of users we recommend to install user accounts and groups. Especially if you use
the FTP protocol the installing of user accounts and groups is necessary.
Proceed as follows:
1. Open the “Control Panel“ via “Start – Settings – Control Panel“. Open “Users and Passwords“ in the control panel.
Click on “Add”.
2. Enter the relevant information in the “User name“, “Full name“, and “Description“ fields. Then click on “Next“.
3. You are then asked for the password. Enter a password and confirm it by entering it again in the “Confirm
password“ field below. Click on “Next“.
4. Select the “Standard user“ option in the next window. Click on “Finish“.
5. Close any windows still open by clicking on “OK“.
You can find further explanations about installing user accounts in Windows Help.
Activating Windows components
The adjustments listed in the following are necessary for correct functioning of the RW-470 PLOTBASE and RW-470
SCANTOOL programs as well as for the connecting the clients.
•
SNMP:
The settings for this protocol must be activated. Proceed as follows:
1. Open the settings window with “Start – Settings – Control Panel – Add/Remove Programs - Add/Remove
Windows Components“.
2. Activate the “Management and Monitoring Tools” (SNMP) option by clicking on the check box.
3. Click on “Next“ and follow the instructions given in the further windows.
•
FTP protocol:
To be able to use the FTP protocol, you must adjust the settings in “Internet Information Services (IIS)“.
1. Open the settings window with “Start – Settings – Control Panel – Add/Remove Programs - Add/Remove
Windows Components“.
2. Click on “Internet Information Services (IIS)“. The check box is still non-active. Click on the “Details“ button.
3. Activate the “File Transfer Protocol (FTP) Server“ option by clicking on the check box. The other options
“Common files“ and “Internet Information Services Snap-In“ are also activated automatically. If all three
services are actually activated, click on “OK“ to confirm the information.
4. Click on ”Next“ and follow the instructions given in the further windows.
Note:
If you want to use the FTP protocol, you must also set up user groups. The procedures are described in
the chapter “Installing user accounts and groups“ on Page 7. Also you have to install a FTP folder with some
presettings. But this should be done after the installation of RW-470 PLOTBASE. It is explained in chapter
„Setting up the FTP default folder“, page 9.
Содержание RW-470 Clients
