INSTALLAZIONE DEI PROGRAMMI RW-470 PLOTBASE E RW-470 SCANTOOL
RW-470 PLOTBASE Installation 55
Ulteriori informazioni sull’impostazione del proprio programma per la posta elettronica sono riportate nella guida di
Windows oppure in quella del programma per la posta elettronica.
Installazione dei programmi RW-470 PLOTBASE e RW-470 SCANTOOL
In questa sezione viene descritta l'installazione dei programmi e quali tipi di file e directory vengono creati sul disco
rigido dopo l'installazione. Si consiglia di non installare il software sullo stesso drive dove è installato il sistema
operativo.
Per l'installazione procedere come descritto qui di seguito:
1. Per l'installazione avviare Windows 2000 come utente con diritti di accesso di amministratore.
2. Nel caso in cui Windows 2000 era già stato avviato [con diritto di accesso da amministratore], chiudere tutti i
programmi in corso oppure eseguire il salvataggio dei dati.
3. Inserire il CD di installazione nell'apposito drive. Il programma di installazione viene avviato automaticamente.
Se il programma di installazione (setup) non è stato avviato automaticamente, aprire Windows Explorer e cliccare
sul file “Setup.exe” nella directory “Install” del CD.
4. Prima di tutto è possibile selezionare nel campo dell'elenco della seguente finestra una lingua per l'installazione.
Confermare con „OK“.
Attenzione:
Sul calcolatore dove viene eseguita l'installazione deve, assolutamente, essere stato installato il
protocollo SNMP, in maniera tale che lo scambio di dati tra il server e il client possa funzionare. Se il
protocollo SNMP non è stato installato viene visualizzato un messaggio di errore. Leggere nel capitolo
„Attivazione dei componenti Windows“, a pagina 53, come viene installato il protocollo SNMP. Iniziare dopo
nuovamente con l’installazione dal punto 3.
5. Viene aperta una nuova finestra: Osservare le istruzioni visualizzate nella finestra: Chiudere tutti i programmi
Windows che sono ancora aperti. Infine cliccare su “Avanti”.
6. Nella finestra successiva cliccare sul pulsante “Sì”, se si accettano le condizioni del contratto di licenza. Cliccare
invece su “No”, se non si accettano le condizioni del contratto di licenza e si vuole interrompere l'installazione.
7. Viene aperto un nuovo dialogo, nel quale viene definita la cartella di destinazione. Nella finestra successiva viene
proposto un percorso di destinazione per il programma. Confermare la proposta con "Avanti" oppure scegliere
un'altra cartella di destinazione.
8. Adesso verrà proposta una cartella per il programma. Confermare il nome proposto cliccando su "Avanti" oppure
immettere il nome di un'altra cartella.
9. Per l'esercizio dell’RW-470 PLOTCLIENT WEB è necessario l‘Apache Web Server. Per questo scopo è sufficiente
che sia stata installata la versione 1.3.9 oppure una versione attuale. L’Apache Web Server fa parte dei cosiddetti
programmi “Freeware”, per questo motivo non può essere garantito che tutte le funzioni siano esenti da errori. In
particolare per le versioni vecchie non può essere garantito, che esse soddisfino le richieste per un
funzionamento senza problemi dell’RW-470 PLOTCLIENT WEB. Disinstallare eventualmente una versione
vecchia. Se l’Apache non è ancora stato installato sul calcolatore, viene caricato automaticamente il programma
di installazione e la versione-Apache fornita insieme viene installata. Dopo aver letto le informazioni nella prima
finestra cliccare su "Avanti".
10. Nella finestra successiva viene chiesto se si accettano le condizioni del contratto di licenza. Se si accettano le
condizioni del contratto di licenza cliccare su “Yes”. Cliccare invece su “No”, se non si accettano le condizioni del
contratto di licenza e si vuole interrompere l'installazione.
11. Nella finestra successiva vengono indicate delle informazioni sull’Apache Web Server. Dopo aver letto tutto,
cliccare sul pulsante “Avanti”.
12. Nella finestra successiva viene proposto un percorso di destinazione per il programma. Confermare la proposta
del percorso con "Avanti" oppure scegliere un'altra cartella di destinazione.
13. Nella finestra successiva vengono proposti diversi tipi di setup. Non modificare l’impostazione predefinita
“Typical”. Dopo, cliccare sul pulsante “Avanti”.
14. Adesso verrà proposta una cartella per il programma. Immettere il nome di un'altra cartella oppure confermare il
nome di quella proposta cliccando su "Avanti".
15. Nella finestra successiva viene visualizzato il messaggio, per indicare che l'installazione dell'Apache Web Server
può adesso essere conclusa. Adesso bisognerà decidere se si desidera leggere il file “Readme”. Attivare per
questo scopo la casella di controllo. Il file readme contiene delle informazioni sull'Apache Web Server. Cliccare
su “Fine”.
16. Il dialogo successivo indica che vengono installati i file di contratto di licenza (RSP). Per questo scopo viene
richiesto di inserire i dischetti del contratto di licenza nel drive per dischetti. Dopo, cliccare sul pulsante “OK”.
Viene aperta una nuova finestra. Adesso si può scegliere tra l’installazione di una versione standard oppure una
di dimostrazione. La versione di dimostrazione consente di provare le opzioni, che possono ulteriormente essere
richieste presso il proprio rivenditore. Tuttavia ogni stampa e ogni file scandito viene provvisto di un timbro. Dopo
aver provato la versione di dimostrazione, si può “sovrainstallare” successivamente la versione standard
(License.rsp).
Per l’installazione dei file di contratto di licenza procedere nel seguente modo:
Содержание RW-470 Clients
