INSTALLATION OF RW-470 PLOTCLIENT WIN ON A WINDOWS PC
RW-470 PLOTBASE Installation 11
III. Installation of Clients on work stations
Installation of RW-470 PLOTCLIENT WIN on a Windows PC
In this chapter you can read about which system requirements have to be fulfilled and how to carry out the installation.
System requirements for RW-470 PLOTCLIENT WIN
Please read through the following recommendations carefully. They can be very helpful in finding the optimum
hardware for your requirements.
•
Operating system
Windows NT 4.0, Windows 95/98/ME or Windows 2000. For Windows 2000 we recommend Service Pack 1. You can
use a higher Service Pack version, too, but if it does not run, please change back again to Service Pack 1
•
Network interface/Configuration
:
10/100 Base T Ethernet, the TCP/IP configuration is necessary
•
Processor
Pentium II.
•
System memory
We recommend at least 64 MB RAM.
•
Harddrive
Each harddrive at least 500 MB.
•
Monitor
At least 1024 x 768 pixels resolution.
Installation of RW-470 PLOTCLIENT WIN
This section describes the installation of the program.
To install the program, please proceed as follows:
1. Start Windows as a user with administrator rights and open Windows Explorer.
2. If Windows was already started [with administrator rights], please quit all running programs or backup the data
stocks.
3. Open in the Windows Explorer \\<Server>\Tools\PLOTCLIENT_WIN. You can also find the “tools” folder on your
installation CD.
4. Start the file SETUP.EXE.
5. Select the SETUP language, and then click on OK.
6. Click on “NEXT”.
7. Click on “Yes”, if you agree to the license agreement. Click on “NO”, if you do not agree and want to cancel the
installation.
8. Answer the question about the Readme-file, and click on NEXT.
9. Click on “NEXT”, to confirm the target folder, in which RW-470 PLOTCLIENT WIN is to be installed.
10. Click on “NEXT”, to confirm the unchanged or changed program folder.
11. Determine the SSL Spool folder. The standard preset is the folder “\\<Server>\Spool\SSL“.
The first part “\\<Server>“ gives the destination computer, on which RW-470 PLOTBASE is installed. The second
part “\Spool\SSL“ gives the spool folder released there.
12. RW-470 PLOTCLIENT WIN is then installed. End the installation program with „Finish“.
Installation of RW-470 WINPRINT as a network printer
Before you can use the RW-470 WINPRINT, you have to install it on your client PC as a „network printer“, as you have
already done with every in-house network printer on your PC before.
To install RW-470 WINPRINT as network printer, please proceed as follows:
1. Open „Printers“ window via „Start – Settings – Printers“.
2. Open „Add Printer“ and click on „Next“.
3. Choose „Network Printer“ and click on „Next“.
4. Type printer name including complete network path of the server PC, where RW-470 PLOTBASE is running or click
„Next“ to browse in your in-house network.
5. Search for the server PC and choose RW-470 WINPRINT.
6. Choose RW-470 WINPRINT as standard printer or not and finsih installation.
Now you can choose the RW-470 WINPRINT from your Windows application menu „file – print“.
Содержание RW-470 Clients
