Satel GPRS-T6, Руководство пользователя

Страница: 25 / 30

SATEL GPRS-T6 23
4.3.8 “Firmware update” tab .3.8 “Firmware update” tab
The module firmware can be updated remotely via GPRS. The module firmware can be updated remotely via GPRS.
For information on the firmware update server please refer to the www.satel.eu For information on the firmware update server please refer to the www.satel.eu
website.
Fig. 14. “Firmware update” tab.
Update server
– address of the server to which the module is to connect in order to update
the firmware. It can be entered as an IP address or as a name.
Port
– number of the server port indicated in the decimal format.
SMS initiating update
– content of the control command which must be included in the SMS
message sent to the module telephone number to initiate the firmware update process.
Server address in SMS
– if this option is enabled, you can enter the address of server to
which the module is to connect, and the port number, in the content of SMS initiating the
connection. If the address is not entered, the module will connect to the server whose
address has been programmed in the module.
Check for updates
after every reboot
– if this option is enabled, the module will connect to the firmware update
server after each restart to check if a new firmware version is available.
every… days
– if the module is to periodically check the server for updates, you should
indicate every how many days it should be done. You can program up to 31 days. Value
0 means that the module will not periodically connect to the firmware update server.
SMS messages
Update successful
– SMS message which will be sent after the process of module firmware
update has been finished successfully.
No newer firmware
– SMS message which will be sent after the module has checked that
no newer firmware is available.
Update failed
– SMS message which will be sent after an unsuccessful attempt to update
the module firmware.
The SMS messages with information on results of the update may contain up to 32
characters.
4.4 Programming by means of SMS messages
You can program the module using SMS messages:

at any moment from the telephone whose number is programmed in the "Telephone
numbers for messaging and test transmissions" list, "GSM telephone, Monitoring stations"
tab;