16 GPRS-T6
SATEL
CLIP
CLIP starts test transmission
– if this option is enabled, it is possible to send a test
transmission with the use of CLIP service. Call the module telephone number and after
hearing the dialing tone, hang up – the module will identify the telephone number of the
calling party and send a test transmission according to the preprogrammed settings.
Send SMS with module status to CLIP
– if this option is enabled, it is possible to obtain
information about the module status with the use of CLIP service. Call the module
telephone number and after hearing the dialing tone, hang up – the module will identify
the telephone number of the calling party and send to that number an SMS message
containing the following information:
– module name;
– version of module software (version number and date of build);
– S0 ÷ S4 – current level of signal received by the antenna;
– P – current supply voltage value.
– Z1 ÷ Z8 – information on the status of Z1 ÷ Z8 inputs:
i – digital / analog input normal status,
I – digital input violated,
L – voltage at analog input has dropped below threshold L; information on input
voltage value,
H – voltage at analog input has exceeded threshold H; information on input voltage
value,
b – digital / analog input blocked.
– BTE – information on status of BTE input:
i – input normal status,
I – input violated,
b – input blocked.
– TMP – information on status of TMP input:
i – input normal status,
I – input violated,
b – input blocked.
– ACE – information on status of ACE input:
i – input normal status,
I – input violated.
– AC – information on the AC voltage status:
i – AC voltage OK,
I – AC voltage loss.
– AK – information on the battery status
i – battery OK,
I – low battery.
– OUT1 ÷ OUT4 – information on status of the OUT1 ÷ OUT4 outputs:
o – output inactive,
O – output active.
– EVb – the maximum number of transmissions has been reached (see the "Limit number
of notifications to" parameter in the "GSM telephone, Monitoring stations" tab).
Reaction to CLIP only when number is on list of telephones for messaging
– if this
option is enabled, the module will only send test transmission or SMS message with
