Satel GPRS-T6, Руководство пользователя

Страница: 4 / 30

2 GPRS-T6 SATEL

4 OC type outputs (programmed as NO or NC), controlled:
– locally – by means of inputs;
– remotely – by means of SMS messages or CLIP.

Ability to control the outputs from 64 telephones using the CLIP service.

High-current (0.5 A) output, with polymer fuse, to perform the function of power supply
output (optionally, it can perform the power input function).

Information on the status of supervised equipment and module through reporting in
Contact ID format (GPRS, SMS) or messaging (SMS, CLIP).

Encrypted transmission of events sent with the use of GPRS technology (TCP or UDP
protocol).

Capability to automatically replace the GPRS transmission with SMS message, if there are
problems with GPRS transmission.

Periodical test transmissions for checking availability of the module:
– to selected telephone numbers (with the use of SMS message or CLIP service);
– to monitoring stations.

Capability of generating additional test transmissions:
– after identification of the calling party's telephone number (CLIP service);
– after receiving command from the GPRS-S
OFT
program.

Option to check the status of available resources and account validity of the SIM card
installed in the module.

Indicator of GSM signal level received by industrial cellular telephone and an indicator of
troubles connected with logging into the GSM network.

Module configuration:
– locally – through the RS-232 (TTL) port;
– remotely – through the GSM network (GPRS technology);
– remotely – by means of SMS messages.

Capability of remotely updating the module firmware by means of GPRS.

Ability to automatically restart the module.

Switching power supply, output current 2 A with short-circuit protection, provided with a
battery status supervision and low battery disconnect system.

Powered with 18 V AC (±10%).

Possibility to power with 12 V DC.
2. Description of electronics board
Description of terminals:
+12V
- DC power output / input (12 V DC ±15%).
AC
- AC power input (18 V AC ±10%).
COM
- common ground.
Z1 ÷ Z8
- inputs. They can be programmed as digital (NC or NO type) or analog ones.
01 ÷ 04
- OC type outputs.
BTE
- digital input programmable as NC or NO (it can supervise e.g. the battery of
additional power supply unit).
TMP
- digital input programmable as NC or NO (it can supervise e.g. the tamper
contact of module enclosure etc.).
ACE
- input for testing AC voltage presence (up to 25 V AC).