12 GPRS-T6
SATEL
Monitoring station 1 / Monitoring station 2
Using GPRS technology, event codes can be sent to the STAM-2 monitoring station or
to the SMET-256 converter.
Communication with the subscriber sending event codes with the use of GPRS
technology should be tested by the monitoring station as rarely as possible (if a value
lower than 1 minute is entered in the "Test period" field of the monitoring station, the
time will be rounded up by the module to 1 minute). It is recommended that the
maximum value be set, i.e. 255 seconds.
Disabled
– if this option is selected, event codes will not be sent to the monitoring station.
SMS
– if this option is selected, event codes will be sent to the monitoring station in the form
of SMS messages.
GPRS
– if this option is selected, event codes will be sent to the monitoring station with
the use of GPRS technology.
GPRS, SMS if GPRS failure
– if this option is selected, event codes will be sent to
the monitoring station with the use of GPRS technology, but after a specified number of
failed attempts to send events (lack of receipt acknowledgement from the monitoring
station), the event code will be sent in the form of SMS message.
Tel. number (SMS)
– GSM telephone number used by the monitoring station for receiving
SMS messages. Must be preceded by the country code.
Address (GPRS)
– address of the monitoring station. It can be entered in the IP address
form (4 decimal numbers separated by dots) or as a name.
Port
– number of TCP port through which communication with the monitoring station will be
effected.
The port number must be the same as that programmed in the monitoring
station.
Station key
– enter in this field a string of 1 to 12 alphanumeric characters (digits, letters and
special characters) which define the key for coding the data to be sent to the monitoring
station.
It must be consistent with that defined in the monitoring station for
managing subscribers in the simple mode.
GPRS key
– a string of 1 do 5 alphanumeric characters identifying the module. It must be
consistent with that defined in the monitoring station (“ETHM/GPRS key”).
GPRS attempts number
– the number of failed attempts to send the event code to the
monitoring station using the GPRS technology, after which the module will made an
attempt to send the event code in the form of SMS message. The field is available if the
“GPRS, SMS if GPRS failure” field is selected. You can enter values from 1 to 16 (default:
1).
Advanced encryption
– enabling this option will increase the security level of data
transmitted to the monitoring station. This option requires a SMET-256 converter with
firmware version 1.06 or higher, or STAM-1 PE and STAM-1 RE cards, version 3.03 or
higher.
Object identifier
– enter in this field 4 characters (digits or letters from A to F) which will
serve as an identifier during the test transmissions sent by the module. Do not enter value
0000 (the module will not be sending test transmissions to the monitoring station). Using
digit 0 in the identifier is not recommended.
GPRS reporting
TCP / IP
– if this field is selected, the module will send event codes to the monitoring station
using the TCP protocol.
UDP
– if this field is selected, the event codes will be sent to the monitoring station by the
module using the UDP protocol.
