Sanyo SAP-KCRV243GJ, Техническое и сервисное руководство

Страница: 66 / 78

63
If the room temperature is higher than the temperature setting, the room is cooled down
for 15 minutes by cooling at slightly lower temperature than usual, and if it is close to
the temperature setting, the drying operation is performed, and the fan speed is set
to the highest fan speed setting.
During a drying operation
When operating multiple
indoor units
The room is cooled down for 15 minutes by cooling at a slightly lower temperature than
usual, and the fan speed is set to the highest fan speed setting.
When the unit is used continuously for 15 minutes, the temperature setting has been
reached during a cooling or heating operation or the humidity setting has been reached
during a drying operation (which is only when one indoor unit is operated), operation
will continue for the next 5 minutes at a reduced power level, after which the regular
operation is restored.
If the setting is not reached in either case, regular operation is restored immediately.
After HIGH POWER operation has finished or when a HIGH POWER operation has
been canceled on the way and then reinstated, regular operation is performed for about
5 minutes to protect the unit, and then the HIGH POWER operation is performed.
During HIGH POWER operations, the room temperature may not coincide with the
temperature setting.
During a cooling or drying operation
NOTE
Concerning HIGH POWER
operations
The room is heated for 15 minutes by warm air which has a slightly higher temperature
than usual.
When the HIGH POWER button is pressed during a defrosting operation, the unit enters
the HIGH POWER operating mode upon completion of the defrosting operation.
During a heating operation
When operating one
indoor unit
The room is cooled down for 15 minutes by cooling at a slightly lower temperature than
usual, and the fan speed is set to the highest fan speed setting.
During a cooling operation
NOTE:Tips for Energy Saving
Do Always try to keep the air filter clean. (Refer to "Care and Cleaning".)
A clogged filter will impair the performance of the unit.
To prevent conditioned air from escaping, keep windows, doors and any other openings
closed.
Do not Block the air intake and outlet of the unit. If they are obstructed, the unit will not
work well, and may be damaged.
Let direct sunlight into the room. Use sunshades, blinds or curtains. If the walls and
ceiling of the room are warmed by the sun, it will take longer to cool the room.