Sanyo SAP-KCRV243GJ, Техническое и сервисное руководство

Страница: 63 / 78

60
NOTE
The timer can be programmed while the unit is operating or while it is stopped.
A timer program is canceled after the timer has operated. So the timer should be set
every time programming operation is to be performed.
The airflow direction, fan speed and temperature setting can be changed after a timer
program has been set even when the unit is stopped. Even when operation is stopped
during an ON timer program, the unit will start operating when the set time is reached
provided that the program is not canceled.
As a safeguard to prevent you forgetting to turn off the air conditioner, the unit's operation
will be stopped if the remote control unit has not been operated for at least 25 hours
after the ON timer starts.
When the ON timer is used, the temperature setting may not be reached by the set
time depending on the size and conditions in the room.
Press the CANCEL button.
When either an ON or OFF timer is to be canceled, press the button corresponding to
the timer whose program is to be canceled, and then press the CANCEL button.
To cancel a timer program
NOTE
ON timer (comfort programming)
The unit starts operating automatically to attempt to change the temperature to the desired
level by the set time. (The unit operates at the low fan speed from up to 60 minutes prior
to the set time.)
OFF timer
The unit stops operating at the set time.
3. How to set the ON time (Example) To start operation at 7:10 am.
Operation Indication
The timer indication blinks and
present ON time is shown.
The time can be set in 10-minute
increments. Holding down the button
advances the time rapidly in 10-minute
increments.
The timer indication stops blinking
and the present time is displayed.
1. Press the ON TIME setting button once.
2. Press the Advance, Return ( , )
button until AM 7:10 is displayed.
3. Press the SET button.
A
AM
A A
A
AM
A A