Sanyo SAP-KCRV243GJ, Техническое и сервисное руководство

Страница: 46 / 78

43
Fig. 29
(2) Using a screwdriver, remove the terminal screw(s)
on the terminal plate.
7-5-5. How to Connect Wiring to the Terminal
When connecting each power wire to the correspond-
ing terminal, follow the instructions below and fasten
the wire securely tight with the fixing screw of the ter-
minal plate.
(4) Place the ring connector wire, and replace and
tighten the removed terminal screw using a
screwdriver. (Fig. 31b)
(3) Using a ring connector fastener or pliers, securely
clamp each stripped wire end with a ring connec-
tor. (Fig. 30b)
(1) Cut the wire end with a cutting pliers, then strip
the insulation to expose the stranded wiring about
10 mm and tightly twist the wire ends. (Figs. 30b
and 31a)
For stranded wiring
STRIP
SIZE
7 mm (ACTUAL
SIZE)
Fig. 30a
Solid wire
Loop
Insulation
Strip 25 mm
Fig. 30b
Stranded wire
Ring
connector
Strip 10 mm
Twist wire ends
Fig. 31a
Fig. 31b
special washer
Screw
Ring connector
Terminal plate
Wire
Special
washer
Screw and
Ring
connector
Wire
Loose wiring may cause the
terminal to overheat or result
in unit malfunction. A fire
hazard may also exist.
Therefore, be sure all wiring
is tightly connected.
WARNING
(1) Cut the wire end with a cutting pliers, then strip
the insulation to expose the wire about 7 mm. See
the label (Fig. 29) near the terminal plate.
a) For Indoor Unit
(3) Insert the wire and tighten the terminal screw
completely using a screwdriver.
(2) Using a screwdriver, loosen the terminal screw on
the terminal plate.
(4) Shape the loop wire properly, place it on the termi-
nal plate and fix it securely with the removed ter-
minal screw using a screwdriver.
(3) Using the pliers, bend the solid wire to form a loop
suitable for the terminal screw.
(2) Using a screwdriver, remove the terminal screw(s)
on the terminal plate.
Cut the wire end with a cutting pliers, then strip the
insulation to expose the solid wire about 25 mm.
(Fig. 30a)
(1)
b) For Outdoor Unit
For solid core wiring (or F-cable)