SY265C LC/SY265C LR Excavator OMM
SANY
Operation and Maintenance Manual — 0420
2-5
TABL
E OF
CONT
E
N
TS
INTRODUCTION
SAFE
T
Y
MACHIN
E
CONTROLS
MACHINE
OP
ERA
T
IO
N
MA
INTENANCE
SPEC
IFI
CA
TIO
N
S
OP
T
IO
N
A
L
EQUI
PMENT
Mount and Dismount the Machine
Mounting or dismounting the machine presents hazards.
Observe the following:
•
Always make sure the hydraulic lockout control
lever is in the locked (closed) position before
entering or exiting the machine.
•
Always make sure the machine is at a full stop
before entering or exiting the machine. Never jump
on or off the machine.
•
Never exit or enter the operator cab by any other
location on the machine other than the provided
grab handles and steps.
•
Always face the machine as you mount and dismount.
•
Always maintain three-point contact (both feet and one hand, or one foot and both hands) with the grab
handles, steps, and deck for proper support.
•
Wear safety shoes with slip-resistant soles.
•
Do not walk on any surface of the machine if its slip-resistant material is missing or excessively worn. Do
not step on surfaces of the machine that are not approved for walking or working. Keep all walking and
working surfaces of the machine clean, dry, and slip-resistant.
•
Always keep grab handles, steps, and walkway areas clean and clear of mud, oil, grease, or similar debris.
If these areas are damaged, have them repaired or replaced immediately.
Fig. 2-1
0003054
