SY265C LC/SY265C LR Excavator OMM
SANY
Operation and Maintenance Manual — 0420
5-9
TABL
E OF
CONT
E
N
TS
INTRODUCTION
SAFE
T
Y
MACHIN
E
CONTROLS
MACHINE
OP
ERA
T
IO
N
MA
INTENANCE
SPEC
IFI
CA
TIO
N
S
OP
T
IO
N
A
L
EQUI
PMENT
Cold Environments
In cold environments 32°F (0°C) or below, lubricate only with the oils and fuels shown in “Fluids and Lubricants”
on page 5-10. Prior to starting the engine, make sure that the battery is fully charged and that the battery case and
the cables have not cracked.
Other Weather Environments
NOTE:
If there is evidence of overheating of bearings or bushings, loose parts, or rust during regular
inspection, increase the frequency of lubrication.
Based on experience and suggestions by lubricating oil suppliers, the lubricating intervals listed in the
“Maintenance Schedule” on page 5-15 apply only to normal operating conditions. In harsh environments,
including those with dusty and corrosive air, abnormal external temperature, extremely heavy overload, frequent
operating times, longtime duty cycle, etc., lubricating intervals should be shortened. Always follow the
“Maintenance Schedule” on page 5-15 until enough experience is obtained to establish a new schedule. If there are
bearings or bushings that are overheating, loose parts, or rust during regular inspection, increase the frequency of
lubrication.
Check the Maintenance Log
The Maintenance Log lists regularly scheduled maintenance that should be performed by the operator or service
personnel. All maintenance performed on the machine must be recorded in the Maintenance Log.
