Sanwa Gemini X, Руководство по эксплуатации

Страница: 6 / 56

Page 6
FEaTURES FaMiLiaRizaTiOn
Antenna
Power Indicator
Light
Auxiliary Switch
(Channel 3)
Multi-Function
LCD
FROnT
Power Switch
TRanSMiTTER FEaTURES DiagRaMS
Use the diagrams below to familiarize yourself with the basic features of your Gemini X 2.4GHz FHSS-3 transmitter. Descriptions
of these features can be found on pages 7 and 8.
The transmitter antenna is adjustable. It should be adjusted so that when you're holding the transmitter during use, the
antenna is orientated as close to perpendicular to the ground as possible at all times. This provides the best signal between
the transmitter and the receiver. You should never point the antenna directly at your model, as this results in a weakened signal.
Throttle
Control Stick
Steering
Control Stick
Throttle
Trim Switch
Steering
Trim Switch
Neck Strap Anchor
Programmable
Trim Switch
Programming Keys
Handle
Programming
Toggle Switch
Programming
Toggle Switch
The RX-451 4-Channel receiver included with your Gemini X 2.4GHz FHSS-3 radio control system uses universal 'Z' connectors
which are electronically compatible with the servos of other radio control system manufacturers. The connectors are rugged, but
should be handled with care.
When unplugging the servo connector, it's best not to pull on the servo
wire itself. This could result in damage to the servo wire pins in the plastic
plug. Always grasp the plastic connector itself.
SERvO cOnnEcTORS
- = Negative (Black)
+ = Positive (Red)
S = Signal (Blue)