Sanwa Gemini X, Руководство по эксплуатации

Страница: 24 / 56

Page 24
[[PROgRaMMing MEnU
AUX-Point setting range is -100 to 100. The default setting for Point 1 is -100, for Point 2 is -60,
for Point 3 is -20, for Point 4 is 20, for Point 5 is 60, and for Point 6 is 100.
3) Press the +/INC or DEC/- keys to choose the Point value for the currently displayed Point.
4) Repeat steps 2 and 3 to choose the Point value for each of the desired Points.
Activating and using the Point Auxiliary Function
1) To Activate and use the Point Auxiliary function, move the Auxiliary Switch to the ON position (pushed UP.)
2) Press the Right MENU key (or push the Right Toggle Switch forward) to cycle Forward through the programmed Point
Auxiliary positions and press the Left MENU key (or push the Left Toggle Switch forward) to cycle Backward through the
programmed Point Auxiliary positions. The Auxiliary Channel 3 servo will move the specified Point positions as you cycle
through the different Points.
2) Press the Right or Left MENU keys to scroll to the specific Point you would like to change the
Point value for. The default Point values will be displayed.
AUX-P setting range is 2 to 6. The default setting is 6.
Choosing the Number of Points, Continued....
2) Press the +/INC or DEC/- keys to choose the number of Points you would like to program.
You cannot choose fewer than 2 Points.
Choosing Point Values
1) Move the Auxiliary Switch to the ON position (pushed UP). The last defined Point, along with
it's current Point value will be displayed, and AUX will flash in the Programming Window. In
addition, the Power Indicator Light will flash rapidly.
Assigning Point Auxiliary to the TRM Switch
1) The TRM switch can be programmed to control the Point Auxiliary function.
This allows you to cycle through the Point positions easily during use. Press
the TRM switch up to cycle Forward through the programmed Point positions and
press the TRM switch down to cycle Backward through the programmed Point
positions. For more information, see page 40.
The Auxiliary Switch can be left in the OFF position (pulled DOWN), if you
use the TRM switch to control the Point Auxiliary function.
TRM Switch