SANCH S3800C Series, Руководство пользователя

Страница: 42 / 105

■
I/O Display of Control Terminal
I/O signal status of control terminal displays the I/O status of terminal block in two ways, “LED Each
Segment On/Off “Display in Hexadecimal”.
●
LED Each Segment On/Off Display
As in Table 3.11 and the following Fig, the segments a~dp of LED1 and LED2 are on when the digital
output terminals (FWD
、
REV
、
MI1~MI9) are on, and off when OFF. The segments a~e of LED 3
are on when output terminals MO1~MO4-MCM and MRA-MRC are closed, and off when
disconnected. The segment a of LED 4 is used to represent terminal RA/RB/RC. When terminal RC
and terminal RA appear short circuit, segment a of LED 4 is on and is off when it is disconnected.
Table 3.10 “I/O Checking” Items
Keypad
Display
Item Description
Display pulse count of input terminal MI7 pulse train signal.
Pulse rate (p/s) of the Z phase signal feed back from the
reference PG (p/s).
Pulse rate (p/s) of the Z phase signal feedback from the
slave PG (p/s).
Monitor functional parameter 10.91 set user timing sequence
timer and counter values.
Pulse rate of the A/B phase signal feedback from the slave
PG (1000p/s is displayed as 1.00.)
Pulse rate of the A/B phase signal feed back from the
reference PG (1000p/s is displayed as 1.00.)
PG Detection Pulse rate
(Instruction Side AB Phase)
Terminal MI7 Pulse Input Monitor
PG Detection Pulse rate
(Instruction Side Z Phase)
PG Detection Pulse rate
(feedback Side AB Phase)
PG Detection Pulse rate
(feedback Side Z Phase)
User Timing Sequence
Timer Monitoring
Reserved
Reserved
Reserved
Reserved
Reserved
Tips: When all signals are disconnected, all segments g of (LED1~LED4) are on("----").
Table 3.11 Segment Displays of External Signal Information
Segment
３９