SANCH S3800C Series, Руководство пользователя

Страница: 41 / 105

■
Hexadecimal conversion table
Use binary system 4 bit unit to be converted into hexadecimal. The conversion table is as the follow-
ing.
Menu #d "I/O Checking" in Programming mode allows you to check the I/O states of digital and
analog signals. It is used to check the running status during maintenance or test running.
3.4.3 Checking I/O signal status
Table 3.8 Display Example of Run Status
LED No.
Bit
Mark
D
is
pl
ay
E
xa
m
pl
e
LED
keypad
In
hexad-
ecimal
Binary
System
Table 3.9 Conversion of Binary and Hexadecimal
Binary Binary Hexadecimal Hexadecimal
Table 3.10 “I/O Checking” Items
Keypad
Display
Item Description
Input signals on the control
circuit terminals(Input/output)
Display ON/OFF status of I/O signals on the control circuit
terminal block. refer to the next page“■ I/O Display of Control
Terminal” for related details.
Display terminal AVI input voltage. Unit: V
Display terminal AVI input current. Unit: mA
Display terminal AFM output voltage. Unit: V
Display terminal DFM output voltage. Unit: V
Display terminal DFM output pulse count in unit time. Unit: p/s
Display terminal AUI input voltage. Unit: V
Display terminal AFM output current. Unit: mA
Terminal AVI Input Voltage
Terminal ACI Input Current
Terminal AFM Output Voltage
Terminal DFM Output Voltage
Terminal AUI Input Voltage
Terminal AFM Output Current
Reserved
Terminal DFM Output Frequency
Reserved
３８