installation & connection
22_
installation & connection
connectinG witH otHer Device
preparing adapter and cable
J
`
Connect the camera to the power adaptor. Then, plug the power cord of the adaptor to the wall
outlet.
Check out the rated voltage and current before making connections.
Rated Power
Allowable Input Voltage
Current Consumption
AC 24V
AC 22V ~ 26V
(SNP-L5233 : AC 24V, 2.5A/
SNP-L5233H : AC 24V, 3A)
J
`
If applied with both PoE+ and AC 24V power supplies, the device is powered from the first
engaged supply.
-
It is preferred to use single power supply of either one of PoE+ and AC 24V.
`
If connected to a switch device that provides PoE+ power, you don’t need to apply a power source
of AC 24V supply.
`
Make sure the PoE device suffices PoE+ (IEEE 802.3at) specifications.
-
If your device is connected to the switch with the standard of PoE (IEEE 802.3af), then go to
the switch setup menu to “deactivate PoE”.
For further information on switch device, refer to the manufacturer’s manual.
-
It is recommended to use a cable that complies with the PoE+ spec.
`
If you use a PoE+ as a power, the boot time may vary depending on a switch model (by channel)
or a maker (as PoE+ connection time is included.).
AUDIO OUT
AUDIO IN
D+
D-
TXD+
TXD-
GND
GND 1.COM 1.NO 1.NC
IN1 IN2 GND IN3 IN4
2.COM 2.NO 2.NC
AC- FG AC-
