Storage
You can activate recording on your device, set the recording conditions, check the saved
data capacity and format the device itself.
1.
From the Setup menu, select the
<
event ( )
> tab.
2.
Click <
Storage
>.
3.
Select a device to save data in.
M
`
If your device is properly recording data, it
will display “
Recording
”.
`
If you see an “
Error
” message, check the
following:
-
Check the storage to see if it is
connected to the device.
-
Check the files in the storage to see if
they are damaged.
-
Check the storage to see if they are
physically damaged.
`
If the “Error” message does not disappear after following the instructions, format the SD card.
After formatting, if the error message still remains, replace the SD card.
`
If you remove the SD card without changing a button to ‘off’ position in settings or if you connect
a camera to an unstable power source, the SD card may be damaged.
setup screen
114_
setup screen
