setup screen
82_
setup screen
To configure the detailed settings for the preset
1.
Select the number of preset that you
want to configure.
•
After action : In the <
after action
>,
you can select auto execution/video
analysis operation after the preset
operation. (This setting does not
apply in the swing function.)
- Auto run : The sequence setting
for auto execution is performed. If
you turn off the function or if there
is no auto-executing operation, the
preset operation status is maintained. (This setting is not applied if preset is run
with a group or tour function.)
- Video analysis : MD/VA operation is run.
•
Camera setup : You can change the camera setting to the environment of the
selected preset.
Refer to “
camera setup
” for how to set the camera. (page 93)
•
MD / VA : You can set the system to generate an event signal when a movement
is detected in the preset, or an intelligent video analysis event is detected.
For more details, refer to “
mD / va
”. (Page 126)
2.
When done, click [
apply (
)
].
J
`
After saving the preset setting, make sure to select <
Sequence Setup
> or run the preset. If
the operation is not performed, the system may run a wrong operation, such as an unintended
change of preset setting.
`
While setting preset edit, you cannot use the functions, such as preset setting, home position
setting and move to the home position.
