to set the video analysis rules
`
passing
1.
Set the type to <
passing
>.
2.
Click the start and end point on the
screen to set the base line.
You can cancel the line while drawing
an area by right-clicking the mouse.
3.
Select the desired rule:
•
Right: Detects motions of moving
from the left to the right, over the
virtual line.
•
Left: Detects motions of moving from the right to the left, over the virtual line.
4.
Click [
oK
].
5.
To remove a defined rule, right click on the displayed virtual line to open popup
context menu and select [
Delete
] button.
`
entering/exiting
1.
Set the type to <
entering/exiting
>.
2.
Click 4 points on the screen to set the
base area.
You can cancel the line while drawing
an area by right-clicking the mouse.
3.
Select the desired rule:
•
Entering : Detects motions of moving
object whose center point entering
into the defined area, from outside of
the area.
•
Exiting : Detects motions of moving object whose center point exiting from the
defined area, from inside of the area to outside.
4.
Click [
oK
].
5.
To remove a defined rule, right click on the displayed side lines of the area to open
popup context menu and select [
Delete
] button.
setup screen
130_
setup screen
