English
_29
●
in
St
aLL
ation & connection
installing by wall mount
`
fix the installation base with the bracket
1.
Fix the base with the bracket by turning it
clockwise.
2.
As shown in the picture below, gently press and
lift up the handle of the hinged door on the bottom
of the installation base. Please refer to the “
camera
wiring interface Board
” on page 21, connect the
wires.
J
`
Do not connect the camera to a power outlet until the
installation is complete. Supplying power while the
installation is in progress may cause fire or damage the
product.
M
Check cable connection method and install.
`
Note that
BUSHING
s are provided for outdoor
installations where exposed to a moisture
condition through the
PIPE
or
MOUNT
, install
the
HOUSING
using the
BUSHING
to prevent
moisture entering.
-
Apply grease of proper dose on the
BUSHING
before assembling, and run cables through
each hole of the bushings. Use
PINS
to stop up empty holes
having no cable running.
-
Assemble the
BUSHING
to the top side of
HOUSING
’s inside
as shown in the diagram below. At the moment, apply pressure
evenly on the
BUSHING
to secure it tightly to the
HOUSING
as
shown in the diagram.
BUSH
BUSH
하우징
기타 케이블
POWER (AC24V)
POE+ 또는 이더넷 케이블
BUSH
핀
BUSH
하우징
또는 마운트
BUSH
인터페이스
BUSH
HOUSING OR
MOUNT
INTERFACE
BUSH
BUSH
하우징
기타 케이블
POWER (AC24V)
POE+ 또는 이더넷 케이블
BUSH
핀
BUSH
하우징
또는 마운트
BUSH
인터페이스
BUSH
BUSH
PIN
BUSH
HOUSING
ETC CABLE
POWER
(AC24V)
POE+ or Ethernet cable
BUSH
