alarm input
You can set the alarm input type, activation time, and operation mode.
1.
From the Setup menu, select the
<
event ( )
> tab.
2.
Click <
alarm input
>.
3.
Select the alarm input number.
4.
Set whether or not to <
enable
>.
5.
Select the type.
•
Normal open : It is normally open,
but if it is closed, an alarm will be
triggered.
•
Normal close : It is normally closed,
but if it is open, an alarm will be
triggered.
6.
Specify the <
activation time
>.
•
Always : Always check if an alarm
occurs. It activates in operated mode when the alarm occurs.
`
If set to <
Always
>, the activation time cannot be changed.
•
Only scheduled time : Check if an alarm occurs at a specified day of the week for
a specified time period. It activates in operated mode when the alarm occurs.
•
[Clear (
)] : Reset all settings.
•
Minute : Click an area in Activation
Time and set the time by minutes.
•
Hour : Drag your mouse at Activation
Time and set the time by hours.
J
`
The transfer interval setting value must be
smaller than the preset activation interval
to succeed in image transmission.
setup screen
122_
setup screen
