Call Functions 25
To switch between the two calls:
1.
Press the
Options
(LSK)
➔
Swap
. The current active call
is placed on hold and the call on hold is reactivated so you
can continue talking.
2.
Press
to finish and end each call normally.
Using the Speakerphone
While on a call, you can use your Speakerphone by following
these steps:
1.
Press
Spkr on
(RSK).
2.
Press
Spkr off
(RSK) to turn the Speakerphone off.
Important!:
For safety information related to speakerphone use, see
“Responsible Listening”
on page 134.
Searching for a Number in Contacts
You can search for a number in Contacts during a call.
1.
During an active call, press
Options
(LSK)
➔
Contacts
.
2.
With the Contacts entries displayed, enter the name to
locate in the field above the entries. If you enter the first
few letters of the name, the Contact entries list starting
with the first entry matching your input.
– or –
Use the
Up
or
Down
Navigation key to highlight a contact.
3.
Press
View
(LSK) to display contact information for the
highlighted entry.
For further details about the Contact feature, see
“Finding a
Contact Entry”
on page 53.
Call Waiting
You can answer an incoming call while you have a call in
progress, if this service is supported by the network and you
must have previously set the Call waiting option to
Activate
. For
more information, refer to
“Call Waiting”
on page 117.
You are notified of an incoming call by a call waiting tone.
t259_Sienna.book Page 25 Wednesday, January 19, 2011 11:30 AM
