Getting Started 9
2.
Plug the charger’s power plug into a standard AC wall
outlet.
Note:
The previous illustration displays the
incorrect
method for connecting
the charger. If attempted, damage to the accessory port will occur
therefore voiding the phone’s warranty.
3.
When charging is finished, first unplug the charger’s power
plug from the AC wall outlet and then disconnect the travel
charger’s connector from the phone then resecure the
plastic cover over the interface jack on the phone.
Warning!:
Failure to unplug the travel charger before you remove the battery,
can cause damage to the phone.
Low Battery Indicator
When the battery is weak and only a few minutes of talk time
remain; a warning tone sounds and the low battery message
repeats at regular intervals on the display. In this condition, your
phone conserves its remaining battery power, not by turning off
the backlight, but by entering the dimming mode.
When the battery level becomes too low, the phone automatically
turns off.
Switching the Phone On or Off
1.
Press and hold
until the phone switches on.
2.
If prompted to enter the phone password, use the keypad
to enter your password and press
Confirm
(LSK) or
.
3.
If prompted to enter a PIN, use the keypad to enter the PIN
and press
Confirm
(LSK) or
. For further details, see
“Check PIN code”
on page 107.
The phone searches for your network and after finding it,
the term “T-Mobile” displays on the upper left half of your
screen. Now you can make or receive calls.
Incorrect
Correct
t259_Sienna.book Page 9 Wednesday, January 19, 2011 11:30 AM
