9.
DIAL MODE:
Select dial type options. (enblock-requires SEND button to com-
plete the call, or overlap - direct out dial)
•
Scroll to or dial
9
, press
ENTER
.
•
Scroll
LEFT/RIGHT
to select desired display option.
•
Press
ENTER
, display confirms save.
0.
STATION ON/OFF:
Turn various features/functions on/off in the keyset.
These features are:
AUTO HOLD:
When on an outside call, pressing a line button, route button or
flashing CALL button will automatically put your call on hold and connect
you to the next call.
AUTO TIMER:
Timer in LCD that monitors call duration.
HEADSET USE:
Switches between headset and handset use.
HOT KEYPAD:
Allows for dialing without lifting handset first.
PAGE REJOIN:
Allows remaining portion of internal page to be played
through keyset speaker, after handset is replaced.
RING PREF:
Allows for automatically answering of calls when handset is lift-
ed. (Does not require button press)
AME PASSWORD:
Allows password protection of AME feature on set. This
prevents unauthorized listening to messages being left.
AUTO CAMPON:
Allows intercom calls to be automatically camped on to,
when a busy station is called.
DIS SPDNAME:
Allows the speed dial associated name to be displayed while
number is being dialed.
SECURE OHVA:
Allows OHVA calls to be received by station in conversation
on handset.
CALL COST DISP:
Display in LCD that monitors call cost, for duration of call.
CID REVIEW ALL:
Allows user to review Caller ID information for calls sent to
the station. The list is programming dependent and operates on a first in first
out basis. Calls to displayed numbers can be returned with a single button
press, provided LCR is being used.
STOP CID DISPLAY:
Discontinues CID information after call is answered.
AUTO ANS CO CALL:
Allows CO calls to be auto answered on incoming calls.
•
Scroll to or dial
0
, press
ENTER
.
•
Scroll to desired feature, press
ENTER
to change option status.
•
Press
CANCEL
to enter change and return to main Configuration menu.
69
4.
Handset : Sets handset receive volume level. (8 volume levels)
5.
Speaker: Sets station speaker volume level. (16 volume levels
6.
Broadcast: Voice Announce feature volume. (16 volume levels)
CALL FORWARD
See Transferring Calls Section, Forwarding Calls.
CONFIGURATION
1.
PASSWORD:
Customizing Your Keyset Section, Change your Passcode.
2.
LOCK:
Station Lock programming.
See Convenience Feature Section, Locking
3.
Customizing Your Keyset Section, Station Answering
4.
BOSS ANSWERING:
Allows setting of ring type for Bosses station, from
Secretary station.
•
Scroll to or dial
4
, press
ENTER
.
•
Scroll
LEFT/RIGHT
to select desired Bosses
RING TYPE
setting. (Ring,
Automatic, Broadcast(voice announce).
•
Press
ENTER
, display confirms save.
5.
LANGUAGE:
Select station display language programming.
•
Scroll to or dial
5
, press
ENTER
.
•
Scroll
LEFT/RIGHT
to select desired display language.
•
Press
ENTER
, display confirms save.
6.
CID DISPLAY:
Select station incoming CID information display.
•
Scroll to or dial
6
, press
ENTER
.
•
Scroll
LEFT/RIGHT
to select desired display option.
•
Press
ENTER
, display confirms save.
7.
ABSENT MESSAGE:
See Paging and Messaging Section
8.
INTERNAL CALL:
Select incoming information display from internal caller.
(Number or Name)
•
Scroll to or dial
8
, press
ENTER
.
•
Scroll
LEFT/RIGHT
to select desired display option.
•
Press
ENTER
, display confirms save.
68
Home Page
ITP-5012L
Table of Contents
