SET ANSWER MODE (INTERCOM)
You can receive internal calls in one of three modes
•
While on-hook, press
TRSF
and then dial
103
.
•
Dial
0
for Ringing,
1
for Auto Answer or
2
for Voice Announce.
•
Press
TRSF
to store your selection.
NOTE: When your keyset is programmed for Auto Answer and you have Forward
No Answer (FNA) turned on, you must answer screened transfers by pressing
ANS/RLS
or the
MONITOR
key if you are using a 7B phone before your FNA timer
expires or the call will forward.
SET ANSWER MODE (CO)
Your incoming CO calls can be set to follow the intercom answer mode.
•
While on-hook, press
TRSF
and then dial
110
.
•
Dial
15
to access
AUTO ANS CO
.
•
Press the
VOLUME UP
or
DOWN
key to change the status.
•
Press
TRSF
to store your selection.
AUTOMATIC HOLD
While on an outside call, pressing a line key, route key or a flashing
CALL
button
will automatically put your call on hold and connect you to the next call. This fea-
ture can be turned on or off at your keyset.
•
With the handset on-hook, press
TRSF
and then dial
110
.
•
Dial
001
to turn Automatic Hold on or
000
to turn it off.
•
Press
TRSF
to store your selection.
NOTE: Intercom calls can only be automatically put on hold by pressing
TRSF
.
HEADSET OPERATION
Keyset users can switch between headset mode and handset mode. When using
headset mode, press the
ANS/RLS
or the
MONITOR
key if you are using a 7B
phone to answer and release calls.
•
With the handset on-hook, press
TRSF
and then dial
110
.
•
Dial
021
to use the headset or
020
to use the handset.
•
Press
TRSF
to store your selection.
41
40
CUSTOMIZING YOUR KEYSET
AME PASSWORD
This feature allows people using the AME feature to enable password protection.
This will prevent unauthorized people from listening to your messages being left.
The passcode is the same as your station passcode. This feature only applies if
there is an SVM card installed in the system and your keyset has a programmed
AME key.
•
With the handset on-hook, press
TRSF
and then dial
110
.
•
Dial
101
to turn on AME PASSWORD or
100
to turn it off.
•
Press
TRSF
to store your selection.
AUTO CAMP-ON
This option allows intercom calls to be automatically camped on, if possible, when
a busy station is called.
•
With the handset on-hook, press
TRSF
and then dial
110
.
•
Press
081
to turn CAMP-ON on or 080 to turn it off.
•
Press
TRSF
to store your selection.
SELECT RING TONE
Each keyset user can select any one of eight ring frequencies:
•
While on-hook, press
TRSF
and then dial
111
.
•
Dial
1
–
8
or press the
UP
and
DOWN
keys to hear each tone.
•
When you hear the tone that you prefer, press
TRSF
to save it.
NOTE: Specific lines or stations may be programmed to ring with a different tone
than what you have selected for you keyset.
CHANGE YOUR PASSCODE
From the factory, your station passcode is 1234. You can change your station pass-
code whenever you desire.
•
While on-hook, press
TRSF
and then dial
101
.
•
Dial your old passcode.
•
Dial a new passcode (must be four characters). You can use
0
–
9
.
•
Redial the new passcode to verify. If successful, you will hear two beeps. Four
beeps indicate an incorrect code. Reenter the code again.
•
Press
TRSF
to store the new passcode.
Home Page
Table of Contents
DCS Keyset
