APPLICATION PROGRAM MENUS
Much of the call processing of the ITP 5012L can be accomplished by using the
various feature/function screens on the LCD. Below are instructions for additional
call processing and special applications that can be accomplished via the LCD
programming. These screens, features and functions can be accessed by pressing
the
MENU
button. Follow the below user information to utilize these features and
functions.
After pressing the
MENU
button,
use the direction button to high-
light desired menu icon. For multi-
ple screen options, the UP/DOWN
arrows at the top left and right
sides of the LCD may be used to
scroll on a per page basis. Press
ENTER
to access that menu.To nav-
igate within the menu, you may
scroll to the desired option/func-
tion, dial the associated option
function number or press the asso-
ciated select button on either side
of the display.
Press
END
button to exit programming.
PHONEBOOK
Refer to Speed Dialing and Programming Section
E-DIARY
1.
WAKE UP CALL:
Set Wake Up call for desired duration (Everyday, Monday-
Saturday, Monday-Friday). Using the direction button scroll
UP/DOWN
to the
desired option and
LEFT/RIGHT
to scroll to desired option setting.
•
Enter
TIME
via dial pad in 24-hour format.
•
Set
RING TONE
via direction button (
LEFT/RIGHT
) Each tone is heard.
•
Set
REPEAT DURATION
via direction button.
•
Press
ENTER
when finished.
2.
ALARM:
See Alarm Reminder Programming Section
65
Application Program Main Menu Screen
64
•
Dial the trunk number.
•
You may now answer the call by pressing the
ANS
button—
OR
—you may
use
NND
to view more information about this call—
OR
—you can return to
the idle condition by pressing
IGNORE
.
NOTES:
1.
If you are on an intercom call or you have Automatic Hold turned off, you
must finish the existing call or place it on hold before inquiring.
2.
If you inquire about an outgoing call, you will receive a [call no longer avail-
able] display.
REVIEWING PAST CALLER ID CALLS
This feature allows you to review CID information for calls sent to your keyset.This
list can contain 10–50 calls in a last-in, first-out basis.The list includes calls that you
answered and calls that rang your keyset but that you did not answer. When
reviewing this list, you can press one button to dial the person back. The system
must be using LCR to dial the stored number.To access the CID information stored
in your REVIEW list:
•
Press the
REVIEW
button—
OR
—press the
CID
button and then press the
REVIEW
soft key.
•
If you have entries in your review list, the most recent call will be shown first.
•
You can now
CLEAR
this entry—
OR
—use
NND
to view more information
about this call,
OR
Press
DIAL
to call this person back—
OR
—press
SCROLL
and then press
STORE
to save this number in a personal speed dial bin.
NOTES:
1.
Each keyset defaults with ten review bins. Please see your system administra-
tor to determine the number of bins assigned to your keyset.
2.
Your system must have LCR correctly programmed to allow you to
DIAL
num-
bers from the review list or to
STORE
entries from the review list.
Home Page
ITP-5012L
Table of Contents