SET ANSWER MODE (INTERCOM)
You can receive internal calls in one of three modes
for descriptions).
•
While on-hook, press
TRANSFER
and then dial
103
.
•
Dial
0
for Ringing,
1
for Auto Answer or
2
for Voice Announce.
•
Press
TRANSFER
to store your selection.
From the LCD:
•
Press
MENU
button.
•
Scroll to
CONFIGURATION
option and press
ENTER
.
•
Scroll to
ANSWERING MODE
and press
ENTER
—
OR
—you may dial
3
and
immediately enter the option.
•
Scroll
RIGHT/LEFT
to select desired station ring type setting. (Ring, Automatic,
Broadcast [Voice Announce]).
•
Press
CANCEL
to return to the Main Option Page—
OR
—press
END
to return
to idle screen.
NOTE: When your keyset is programmed for Auto Answer and you have Forward
No Answer (FNA) turned on, you must answer screened transfers by pressing the
ANS/RLS
button before your FNA timer expires or the call will forward.
SET ANSWER MODE (CO)
Your incoming CO calls can be set to follow the intercom answer mode.
•
While on-hook, press
TRANSFER
and then dial
110
.
•
Dial
15
to access
AUTO ANS CO
.
•
Press the
VOLUME UP
or
DOWN
key to change status.
•
Press
TRANSFER
to store your selection.
AUTOMATIC HOLD
While on an outside call, pressing a line button, route button or a flashing
CALL
button will automatically put your call on hold and connect you to the next call.
This feature can be turned on or off at your keyset.
•
With the handset on-hook, press
TRANSFER
and then dial
110
.
•
Dial
001
to turn Automatic Hold on or
000
to turn it off.
•
Press
TRANSFER
to store your selection.
From the LCD:
•
Press
MENU
button
•
Scroll to
CONFIGURATION
option and press
ENTER
.
51
50
SELECT RING TONE
Each keyset user can select any one of eight ring frequencies.
•
While on-hook, press
TRANSFER
and then dial
111
.
•
Dial
1
–
8
or press the
UP
and
DOWN
keys to hear each tone.
•
When you hear the tone that you prefer, press
TRANSFER
to save it.
NOTE: Specific lines or stations may be programmed to ring with a different
tone than what you have selected for your keyset.
From the LCD:
•
Press
MENU
button.
•
Scroll to
VOLUME
option and press
ENTER
.
•
Scroll to
RING TYPE
and press
ENTER
—
OR
—you may dial
1
and immediate-
ly enter the option.
•
Scroll to
RIGHT/LEFT
to choose tone and press
ENTER
at the desired tone.
•
Press
CANCEL
to return to the Main Option Page—OR—press
END
to return
to idle screen.
CHANGE YOUR PASSCODE
From the factory, your station passcode is 0000. You can change your station pass-
code whenever you desire.
•
While on-hook, press
TRANSFER
and then dial
101
.
•
Dial your old passcode.
•
Dial a new passcode (must be four characters). You can use
0
–
9
.
•
Redial the new passcode to verify. If successful, you will hear two beeps. Four
beeps indicate an incorrect code. Reenter the code again.
•
Press
TRANSFER
to store the new passcode.
From the LCD:
•
Press
MENU
button.
•
Scroll to
CONFIGURATION
option and press
ENTER
.
•
Scroll to
PASSWORD
and press
ENTER
—OR—you may dial
1
and immediate-
ly enter the option.
•
Enter
CURRENT PASSWORD
, press
ENTER
.
•
Enter
NEW PASSWORD
and press
ENTER
.
•
Enter
NEW PASSWORD
again, for confirmation and press
ENTER
.
•
Press
CANCEL
to return to the Main Option Page—
OR
—press
END
to return
to idle screen.
Home Page
ITP-5012L
Table of Contents
