Samsung ML-6060 Скачать руководство пользователя

Страница: 89 / 175

ROBLEM

OLVING

Solving General Printing Problems

Problem

The printer does not
print.

Possible Cause

The printer is not
receiving power.

Your printer is not
selected as the default
printer.

Check the printer for
the following:

The printer may be in
manual feed mode and
out of paper. (The

Manual

and the

Data

lights are blinking.)

The connection cable
between the computer
and the printer is not
connected properly.

The connection cable
between the computer
and the printer is
defective.

The port setting is
incorrect.

Solution

If no lights are on, check the power
cord connections. Check the power
switch and the power source.

Select

Samsung ML-6060 Series

PCL 6

Samsung ML-6060

Series PS

as your default printer.

• The printer cover is not closed.
• Paper is jammed.
• No paper is loaded.
• Toner cartridge is not installed.
• Printer system error occurs.

Contact a service representative.

Add paper to the Multi-Purpose tray,
and press the

Demo

button on the

printer’s control panel.

Disconnect the printer cable and
reconnect it.

If possible, attach the cable to
another computer that is working
properly and print a job. You may
also try using a different printer
cable.

Check the Windows printer setting to
make sure that the print job is sent
to the correct port (for example,
LPT1). If the computer has more
than one port, make sure the printer
is attached to the correct one.

If you have any problems with the operation of your ML-6060 series printer, refer to the table
for suggested solutions.

Содержание ML-6060
















































































































































































Результаты поиска

Содержание ML-6060

Отзывы:

Похожие инструкции для ML-6060

Бренды по названию

Популярные бренды

Samsung ML-6060, Руководство пользователя

Результаты поиска

Содержание ML-6060

Отзывы:

Похожие инструкции для ML-6060

Бренды по названию

Популярные бренды