P
RINT
M
EDIA
4.
4
Selecting the Output Tray
The printer has two output locations: the
rear output tray
and the
top output tray
.
To use the top output tray, be sure the rear output tray is closed. To use the rear output tray,
open it.
• If paper coming out of the top output tray has problems, such as excessive curl,
try
printing to the rear output tray.
• To avoid paper jams,
do not open or close the rear output tray
while the printer is
printing.
The top output tray collects paper
face-down
,
in
correct order
. The top output tray should be used
for most print jobs and is recommended for printing
the following:
• over 250 sheets of paper, continuously
"
"
"
"
Top output tray
The printer always prints to the rear output tray if it
is open. Paper comes out of the printer
face-up
,
with the last page on top
.
Printing from the Multi-Purpose Tray to the rear
output tray provides the
straight paper path
.
Opening the rear output tray might improve output
quality with the following:
• over 100 sheets of paper, continuously
• envelopes
• labels
• small custom-size paper
• postcards
• paper lighter than 16 lb (60 g/m
2
) or
heavier than 28 lb (105 g/m
2
)
• transparencies:
Note:
Some special transparencies may have
stacking problem by curl. In that case, please use the
face down tray.
Sam
sung
Prin
ter
LASER PRINTER
ML-6060
Printing to the Top Output Tray
(Face down)
Printing to the Rear Output Tray
(Face up)
"
"
"
"
Rear output tray
