S
PECIFICATIONS
A.
9
When selecting labels, consider the quality of each component:
•
Adhesives:
The adhesive material should be stable at
200 °C (392 °F), the printer’s fusing temperature.
•
Arrangement:
Only use labels with no exposed backing
between them. Labels can peel off sheets with spaces
between the labels, causing serious jams.
•
Curl:
Prior to printing, labels must lie flat with no more than
13 mm (.5 in.) of curl in any direction.
•
Condition:
Do not use labels with wrinkles, bubbles, or other
indications of separation.
See “Printing on Labels” on page 4.14.
Transparencies used in the printer must be able to withstand
200 °C (392 °F), the printer’s fusing temperature.
See “Printing on Transparencies” on page 4.15.
CAUTION:
To avoid damaging the printer, use only
transparencies recommended for use in laser printers.
CAUTIONS:
• To avoid damaging the printer, use only labels
recommended for laser printers.
• To prevent serious jams, always use the Multi-Purpose Tray
to print labels and always use the rear output tray.
• Never print on the same sheet of labels more than once or
print on a partial sheet of labels.
Paper Specifications
Labels
Transparencies
