Samsung iDCS 100, Инструкция пользователя

Страница: 79 / 155

NOTE: If the Hot Keypad feature has been turned off, you must first lift the
handset or press the
SPK or the MONITOR key if you are using a 7B phone
before dialing.
RECALL DIAL TONE
Press the NEW button to disconnect your existing call, wait for dial tone and
then make a new call on the same line.
NOTE: If this button does not appear on your keyset, the FLASH key may
be programmed to recall dial tone.
SENDING A FLASH
While on an outside call, press the FLASH key to send a flash to the tele-
phone company. This is required for some custom calling features or CEN-
TREX use.
NOTE: Flash is not available on an ISDN circuit.
BUSY LINE QUEUING WITH CALLBACK
If you receive a busy signal when you are selecting an outside line, this
means that the line or group of lines is busy.
• Press the CBK key, if programmed, or dial 44 . You will hear confirmation
tone.
• When the line becomes free, the system will call you back.
• Lift the handset or press the ANS/RLS key to answer, wait for dial tone
and dial the telephone number or speed dial number again.
NOTES:
1.
A callback will be canceled if not answered within 30 seconds. If you
have set a callback, your
CBK key will light.
2. If the Hot Keypad feature has been turned off, you must first lift the hand-
set or press the
SPK or MONITOR key if you are using a 7B phone
before dialing.
CANCELING CALLBACK
A callback will be canceled if not answered within 30 seconds. If you have
set a callback, your
CBK key will light.
Your phone may have a maximum of five callbacks to lines and/or stations
set at a time. To cancel a callback:
• Press the CBK key, if programmed, or dial 44 . You will hear confirmation
tone.
11 10
OUTSIDE CALLS
MAKING AN OUTSIDE CALL
• Lift the handset and press an idle outside line button, line group button
or dial a line access code to receive dial tone
—OR— to use the speak-
erphone, press an idle outside line button, line group button or dial a line
access code to receive dial tone through the speaker
—OR— press SPK
or the MONITOR key if you are using a 7B phone, receive intercom dial
tone and dial a line access code.
• Dial the telephone number.
• Finish the call by replacing the handset or pressing the ANS/RLS key.
NOTE: You will receive No More Calls tone when you attempt to make a call
and there is no key available for that line.
• If Least Cost Routing is enabled on your phone system, this button may
be labeled
LCR or accessed by dialing an access code (usually 9 ).
• If your system is programmed to require an authorization code before
making a call, dial
4
plus a valid code before selecting a C.O. line.
• If your system is programmed to require an account code before mak-
ing a call, press the
ACCT button or dial 47 plus a valid code, press the
ACCT button again and then select a C.O. line.
For more information on authorization and account codes, see your system
administrator.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the
handset or press the
SPK or the MONITOR key if you are using a 7B phone
before dialing.
ANSWERING AN OUTSIDE CALL
• Lift the handset and you are automatically connected to the ringing call.
See Ring Preference under Customizing Your Keyset — OR —press the
ANS/RLS key to automatically answer on the speakerphone.
NOTE: If a call is flashing at your keyset but not ringing, you must press the
flashing button to answer.
UNIVERSAL ANSWER
Outside lines may be programmed to ring a general alerting device. To
answer calls ringing this device, dial
67 or press the UA key. This device can
operate in any one of the six different ring plans.
HOME PAGE Table of Contents Guide-Contents