Samsung iDCS 100 Скачать руководство пользователя

Страница: 120 / 155

PULSE TO TONE CHANGEOVER

When making an outside call on a dial pulse line, press

. All digits dialed

after the

will be sent as tones.

DIALING FEATURES

SPEED DIALING

You can dial a preprogrammed telephone number stored in the system-wide
speed dial list of numbers 500–999 or from your personal list of numbers
00–49.

• Lift the handset and dial

• Dial the desired speed dial number.
• The telephone number is automatically dialed for you.

PROGRAMMING PERSONAL
SPEED DIAL NUMBERS

To program personal speed dial numbers:

• Lift handset to go offhook.
• Dial

15105

the next available speed dial bin number (e.g.

), a trunk

or trunk group number and your speed dial digits.

• Listen for system dial tone and replace handset.

LAST NUMBER REDIAL

To redial the last telephone number you have dialed:

• Lift the handset and dial

NOTE: Redial does not apply to intercom calls.

SAVE NUMBER WITH REDIAL

To save the number you have just dialed for later use:

• Before hanging up, hookflash, receive confirmation tone and dial

To redial this saved number at any time:

• Lift the handset and dial

. This step will select the same line and dial

the number for you.

This telephone number is stored in memory until you save another. When
you do, the new number will be saved and the old number will be erased.

NOTE: Save Number does not apply to intercom calls.

HOME PAGE

Table of Contents

Guide-Contents

Содержание iDCS 100




























































































































































Результаты поиска

Содержание iDCS 100

Отзывы:

Похожие инструкции для iDCS 100

Бренды по названию

Популярные бренды

Samsung iDCS 100, Инструкция пользователя

Результаты поиска

Содержание iDCS 100

Отзывы:

Похожие инструкции для iDCS 100

Бренды по названию

Популярные бренды